HomePreformed Line Products  
Solar Electric Power Systems
Home
 
Batteries >>
Battery Boxes >>
Battery Chargers >>
Charge Controllers >>
Engine Generators >>
Inverters >>
Modules >>
Pumps <<
Racks >>
Uninterruptible Power Systems >>
Utility Interactive & Grid Tied Systems >>
Wind Power >>

Shurflo Pumps
General Information

Features

  • Self priming up to 12 feet
  • Can run dry without damage
  • Optional motor cooling fins
  • One way check valve prevents reverse flow
  • Available for 12 VDC, 24 VDC, and 115 VAC
  • Automatic operation with pressure demand switch

Diaphragm pump Shurflo 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of transfer and dispense-on demand applications where flow to 3.6 GPM is required. For added reliability the Twist-on Strainer can be used on the 2088 inlet port. Install optional 4" or 5" heatsink for heavy duty applications where extra cooling is required.

Model

Description

2088-443-144

Standard Pump
3.5 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports

2088-514-145

Premium Pump w/Fin Cooled Motor
3.6 open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports

2088-414-534

Premium Pump w/ Splash-Proof ShurCoted Motor
3.6 GPM open flow, Santoprene® valves Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports

2088-474-144

Standard Pump
3.0 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports

2088-574-534

Premium Pump w/Sealed Motor
3.6 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT* ports

2088-594-154

Standard Pump
3.3 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT* ports

2088-514-144

Standard Pump
3.8 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT* ports

Shurflo Submersible Pump 9325 Controllers

902-100 Features

  • Operates on 24 VDC
  • Increases daily water output up to 30%
  • System starts pumping earlier in the morning
  • System stops pumping later in the evening
  • Protects pump from low or high voltage conditions
  • Terminals for float switch

ControllerBoost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.

DC Pump Controller Model 902-100 (PDF)  1723 KB

902-200 Features

Includes all 902-100 features plus:

  • Switch selectable for 12 VDC or 24 VDC operation
  • Pump On / Off switch
  • Water tight enclosure and cable inlets
  • Includes water level monitor mode with probes and cable

902-200The versatile 902-200 has all the features of the 902-100 and more. This controller is switch selectable for 12 VDC or 24 VDC operation awnd includes a manual on/off switch for easy pump maintenance. The controller comes with high / low water level sensors so the pump will not run when the well water is too low. Weather proof enclosure.

 

902- 100 / 200 Specifications

  • Maximum power output 150 Watts
  • Over temperature shutdown 176ºF (80ºC)
  • Ambient temperature 14ºF (-10ºC) to 113ºF (45ºC)

9300 Series Submersible DC Pump 24 VDC

Submersible pump

Model

9325-043-101

Description

24VDC Submersible Pump for potable water wells 1/2" Hose Barb discharge port 50 mesh SS inlet screen

Vertical Lift
(feet)

20

60

100

140

180

230

Vertical Lift
(meters)

6.1

18.3

30.5

42.7

54.9

70.1

Flow (GPH)

111

105

100

93

87

79

Flow (LPH)

420

398

379

352

329

300

Solar Array (Min Watts)

58

78

99

115

135

155

Current Amps

1.7

2.3

2.9

3.5

4.0

4.6

9300 Series Submersible Pump (PDF)  5336 KB

Accumulator and Pumps

PumpPump

Features:

  • Fully automatic
  • Quiet operation
  • Self priming
  • Corrosion resistant
  • Can run dry without damage

These boost systems include high flow 2088 Series or Power Twin Pumps with a 2 gallon stainless steel accumulator tank to deliver instantaneous water flow to remote homes and cabins.

Model

Description

804-009-00

12 VDC 3.8 GPM / Accumulator Combo
w/ 2 gallon [7.57 Liter] stainless steel accumulator tank. Pump Specs: EPDM valves, Santoprene® diaphragm, 45 PSI

804-009-01

12 VDC 5.6 GPM / Accumulator Combo
w/ 2 gallon [7.57 Liter] stainless steel accumulator tank. Pump Specs: EPDM valves, Santoprene® diaphragm, 45 PSI

804-009-02

24VDC 6.5 GPM / Accumulator Combo
w/ 2 gallon [7.57 Liter] stainless steel accumulator tank. Pump Specs: EPDM valves, Santoprene® diaphragm, 45 PSI

 
Pump Index
 
Home | Company | Products | Why Photovoltaics
Custom Engineered Systems | Contact | Site Map
 
©2002-2003 Direct Power & Water Corporation
 
Designed and developed by JT Studios and SunFox Web Creations