HomePreformed Line Products  
Solar Electric Power Systems
Home
 
Air Monitoring Systems >>
Billboard & Stand Alone Lighting Systems <<
Direct Power Plant >>
Emergency Backup System >>
Industrial and Government Projects >>
Remote Home Systems >>
Solar Water Pumping Systems >>
Telecommunications >>
Utility Interactive & Grid Tied Systems >>

Custom Engineered Systems

Billboard & Stand-Alone Lighting

Overview of Solar Electric System Design
Yucca Project - Albuquerque, New Mexico

PV stand-alone lightingThis solar electric system has been designed and engineered by Kevin Goodreau of Direct Power and Water Corporation. The electrical design incorporated 12 "Color Kinetics" Colorburst LED's to illuminate the artwork for a maximum of nine hours per nigh. The expected average load of all LED's when illuminated was expected to be approximately 252 watts. The light show is directed by the I-Player 2 which is a storage and playback system for Color Kinetics digital lighting products. With 16MB of on-board memory, iPlayer 2 accommodates a full DMX universe (170 individual light addresses). We can create one long show or multiple shorter shows on Color Kinetics ColorPlay light show authoring software.

The system was installed by B & D Electric of Albuquerque, New Mexico in conjunction with Direct Power and Water Corporation of Albuquerque. RLK Sales Corporation (Mr. Kevin Burke) was instrumental in helping with the overall lighting design and placement of the LED's at the Yucca. The lighting project was a collaboration of the three aforementioned companies under the direction of Mr. Jim Kraft.

PV stand-alone lightingIncluded in this design are 6 Sharp 165 watt modules. The modules are a nominal 24vdc module and each module is fused at the array in the combiner box. Five of the six modules are wired to the Outback Power Products MX60 charge controller and one module is wired to the Morningstar lighting controller. The Morningstar charge controller is a pulse width modulated charge controller and also serves a light controller for the LED's. When the voltage is < 3vdc (when the sun sets in the west sky) the Morningstar lighting controller closes a FET in the controller and sends a signal to a 24vdc coil relay. When the coil closes 120vac power from the Exeltech 600-24 inverter energizes the four PDS150e power supplies, the I-player and then the LED's are illuminated. The length of illuminated is determined by the Morningstar controller. Currently the controller is set for eight hours.

This array will produce a maximum of 990 watts of power in full sun. Electrical production of this array is expected to be between 79,200 and 81,840 Watt hours per month. This figure is calculated based on a tilt angle of 45º.

PV stand-alone lighting PV stand-alone lighting PV stand-alone lighting
 
Billboard & Stand Alone Lighting Index
 
Home | Company | Products | Why Photovoltaics
Custom Engineered Systems | Contact | Site Map
 
©2002-2003 Direct Power & Water Corporation
 
Designed and developed by JT Studios and SunFox Web Creations